2 new hoops/straps for an old elliptical barrel

Before
This is an old cast iron bath foot which was broken in two
After

Before
An old steel Street Lamp with a very large rusted hole.
We rebuilt the fitting and redefined the detail.
After

Below is a close up of a fire place that had a broken corner we re-fitted it.
The top hinge is the original 200 year old hinge of an old French chest.
The bottom hinge is a 2 week old copy
A cast iron church floor vent grill which was broken for years, We put it back together.
Above are the remnants of some ridge tiles of a Victorian dolls house.
We were commission to make some more to replace them, pictured below are some that were hand cut to keep the irregularities in to keep them looking old and hand made.
a broke cast iron ash pan cover from a fire place is rebuilt.
We have made various hinges for renovation projects pictured above on the left is a steel hinge our new hinge is far left the original is on the right of it. On the right is a brass hinge for a writing cabinet made from brass sheet.
We make many fire place parts inc. Hoods, grills grates, ash pans, ash pan covers etc..
shown on the left are 2 grills made by us, the top one was polished, and the bottom one was made with feature wiggle bars.
On the right is a hood made with some feature added to match the fire place.

 

 

This is an antique syphon stove which was fully refurbished by us.
Above is before and after is below. We completely dismantled all movable parts, then stripped all the paint off. We cleaned and polished the copper details, repaired all broken elements and straighten out the chimney, then finished with iron paste.

This is one of the Simplest designs of fire place I have renovated but In my eye it was one of the most stunning, It is about 4 ft tall but very narrow. We stripped it then burnished it. The hood, grill, ash pan and ash pan cover were missing. These were all replaced, the hood, grill and ash pan cover were all polished

This surround was left at the back of a barn because of the missing corner. My client couldn't throw it out, eventually they found us and we made the repairs by inserting in a new bit, we also made the grill to fit.

Below shows a close up of the repair.


We have renovated a wide range of items from old garden furniture to Victorian projectors on this page you can see some before and after renovations done to date. You will also see some of our finishing abilities. We have fixed items that were considered At the end of their life. Please look at the following and contact us should you have any requirements


































Renovations